9.5mm Twist Step Drill Bit With Depth Stop Collar for Pocket Hole Jig Kit
- List PriceUS$7.23piece
- Sale PriceUS$4.99piece
- ShippingFree Shipping
9.5mm Twist Step Drill Bit With Depth Stop Collar for Kreg Pocket Hole Jig Kit
The shank size: 3/8"(9.5mm)
Total Length: 6.29" (160mm)
- Drill bit for use with pocket hole joinery.
- Small tip includes clearance hole for screw shank.
- Large diameter creates flat-bottomed hole.
- Recommended for use with corded high-rpm drills.
How to use:
1. Adjust the height of the drill bit.
2.Clip board which you want to drill.
3. Put the drill into the hole in the wood.
4. Drill up 5 mm (remember not against the wood to drill).
5. Start the drill reaches a certain speed above 500 rpm, 1500 rpm is the best.
6. advanced to slow down, such as front-end fine drill in half or full, then can speed up.
1pc x Twist Step Drill Bit
1pc x Wrench
1pc x 9.5mm (3/8") Stop Collar